Каталог твердосплавных фрез Talicarb POWER - 2008 EN
для заказа - ilix@ilix-tools.ru
LU Effettiva lunghezza utile di lavoro legata all’inclinazione del pezzo da lavorare
Effective machining depth depending on inclined angle of workpiece
Longueur utile effective d'usinage lie l'inclination de la pice usiner
Die effektive Arbeitstiefe hngt vom Neigungswinkel des Werkstckes ab
Largo util de trabajo depende del angulo de inclinacion de la pieza
/R L2 /R L2
mm mm mm mm
0.5° 1° 1.5° 2° 2.5° 3° 0.5° 1° 1.5° 2° 2.5° 3°
LU LU
1.2/0.12 6 6.61 7.32 7.8 8.2 8.55 8.87 2.0/0.2 14 10.66 15.53 16.32 16.91 17.42 17.86 TECHNICAL DATA - SERVICE TECHNIQUE - TECHNISCHE HILFE - INFORMACIN TCNICA
1.2/0.12 8 7.54 9.32 9.91 10.37 10.77 11.14 2.0/0.2 16 10.66 17.53 18.4 19.04 19.58 -
1.2/0.12 10 7.54 11.32 12.01 12.53 12.98 13.38 2.0/0.2 18 10.66 19.53 20.48 21.16 21.73 - INFORMAIZONI TECNICHE
1.2/0.12 12 7.54 13.32 14.1 14.68 15.17 15.59 2.0/0.2 20 10.66 21.53 22.55 23.28 -
1.4/0.14 6 6.73 7.38 7.84 8.23 8.58 8.89 2.0/0.2 25 10.66 26.53 27.73 28.54 - -
1.4/0.14 8 8.34 9.38 9.95 10.4 10.8 11.16 2.0/0.2 30 10.66 31.53 32.89 - -
1.4/0.14 10 8.32 11.38 12.04 12.56 13.4 2.5/0.25 8 9.23 9.81 10.26 - -
1.4/0.14 12 8.32 13.38 14.14 14.71 13 15.61 2.5/0.25 10 11.07 11.81 1235 10.66 11.02 11.36
1.4/0.14 14 8.32 15.38 16.23 16.84 15.19 17.81 2.5/0.25 12 12.87 13.81 14.43 12.8 13.21 13.58
1.4/0.14 16 8.32 17.38 18.31 18.97 17.36 2.5/0.25 14 14.6 15.81 16.5 14.94 15.38
1.5/0.15 6 6.78 7.41 7.86 8.25 19.52 20 2.5/0.25 16 15.48 17.81 18.58 17.06 - -
1.5/0.15 8 8.45 9.41 9.96 10.42 8.59 8.91 2.5/0.25 18 15.48 19.61 20.65 19.18 - -
1.5/0.15 10 8.71 11.41 12.06 12.57 10.81 11.17 2.5/0.25 20 15.48 21.81 22.72 21.29 - -
1.5/0.15 12 8.71 13.41 14.15 14.72 13.01 13.4 2.5/0.25 25 15.48 26.81 27.88 - -
1.5/0.15 14 8.71 15.41 16.24 16.86 15.2 15.62 2.5/0.25 30 15.48 31.81 - - -
1.5/0.15 16 8.71 17.41 18.32 18.98 17.37 17.82 3.0/0.3 8 9.54 10.02 - - - -
1.5/0.15 18 8.71 19.41 20.41 21.11 19.53 20.01 3.0/0.3 10 11.41 12.02 10.43 - 11.14 -
1.5/0.15 20 8.71 21.41 22.48 23.22 21.68 22.19 3.0/0.3 12 13.28 14.02 12.51 10.8 13.31 11.45
1.6/0.16 6 6.83 7.43 7.88 8.26 23.83 3.0/0.3 14 15.12 16.02 14.58 12.93 15.48 13.66
1.6/0.16 8 8.53 9.43 9.98 10.43 8.6 - 3.0/0.3 16 16.94 18.02 16.65 15.06 17.63 15.86
1.6/0.16 10 9.1 11.43 12.08 12.59 10.82 8.92 3.0/0.3 18 18.7 20.02 18.72 17.18 19.78 18.05
1.6/0.16 12 9.1 13.43 14.17 14.73 13.02 11.18 3.0/0.3 20 20.24 22.02 20.79 19.29 21.92 20.22
1.6/0.16 14 9.1 15.43 16.26 16.87 15.21 13.41 3.0/0.3 25 20.09 27.02 22.85 21.4 24.06 22.38
1.6/0.16 16 9.1 17.43 18.34 17.38 15.63 3.0/0.3 30 20.09 32.02 28.01 23.5 29.37 24.54
1.6/0.16 18 9.1 19.43 20.42 19 19.54 17.83 3.0/0.3 35 20.09 37.02 33.16 28.75 34.65 -
1.6/0.16 20 9.1 21.43 22.5 21.12 21.69 20.02 3.0/0.3 40 20.09 42.02 38.3 33.98 - -
1.8/0.18 6 6.91 7.48 7.92 23.23 23.84 22.19 4.0/0.4 12 13.54 14.2 43.43 39.19 - -
1.8/0.18 8 8.67 9.48 10.02 8.29 8.63 4.0/0.4 16 17.28 18.2 14.72 - 15.58 -
1.8/0.18 10 9.88 11.48 12.11 10.46 10.85 - 4.0/0.4 20 20.94 22.2 18.85 15.18 19.87 15.95
1.8/0.18 12 9.88 13.48 14.2 12.61 13.05 8.94 4.0/0.4 25 24.09 27.2 22.98 19.4 - -
1.8/0.18 14 9.88 15.48 16.29 14.76 15.23 11.2 4.0/0.4 30 24.09 32.2 28.13 23.6 - -
1.8/0.18 16 9.88 17.48 18.37 16.89 17.4 13.43 4.0/0.4 35 24.09 137.2 33.27 28.84 - -
1.8/0.18 18 9.88 19.48 20.45 19.02 19.56 15.65 4.0/0.4 40 24.09 42.2 38.4 - - -
1.8/0.18 20 9.88 21.48 22.52 21.14 21.71 17.85 4.0/0.4 45 24.09 47.2 - - -
2.0/0.2 6 6.99 7.53 7.96 23.25 35.85 20.03 4.0/0.4 50 24.09 52.2 - - - -
2.0/0.2 8 8.77 9.53 10.05 8.23 8.66 5.0/0.5 16 17.53 18.36 - - - -
2.0/0.2 10 10.44 11.53 12.15 10.49 10.87 - 5.0/0.5 25 25.83 27.36 - - - -
2.0/0.2 12 10.66 13.53 14.23 12.64 13.07 - 5.0/0.5 35 28.09 18.98 - - -
14.78 15.25 8.96 5.0/0.5 50 28.09 - - - - -
11.22 - - - - -
13.45 - - -
15.67
ilix@ilix-tools.ru 73
www.ilix-tools.ru
